12 February 2015

Damen subsidiary kicks off second half-century with three innovations

After celebrating its 50th anniversary in 2013, Van der Velden Marine Systems is not resting on its laurels. The Netherlands-based company’s R&D department is continuing along its successful path of advancing maritime manoeuvring and propulsion efficiency. Significantly, Van der Velden Marine Systems, a daughter company of the Damen Group, has a cooperative approach to R&D resulting in fruitful synergies and the sharing of expertise with other maritime experts.

“We are currently building a 97m2 Energy Saving Package (ESPAC™) system for a series of three 18,000 TEU vessels being built for CMA CGM at the CSSC-affiliated Shanghai Waigaoqiao Shipyard in China,” says Edwin van Buren, Director R&D at Van der Velden Marine Systems.

ESPAC™ illustrates the company’s relationships with other propulsion specialists: they developed the system with German propeller manufacturer Mecklenburger Metallguss (MMG). “These are the largest rudders we have ever built and, by putting them together with 10-metre MMG propellers, the whole package will minimise fuel consumption, cavitation, vibration and maintenance.” Drawing on the expertise from both companies, this tailor-made propulsion package combines the advantages of an optimised, highly efficient fixed pitch propeller and an asymmetric leading edge rudder with a propulsion bulb and adapted hubcaps.

Rudder feedback

The second innovation concerns the Barke Optimised Steering System (BOSS™), which provides direct feedback

The second innovation concerns the Barke Optimised Steering System (BOSS™), which provides direct feedback to the helmsman about forces acting on the rudder. This information is a valuable tool to optimise navigation and manoeuvring.

“It is important to know how much stress is placed on the rudder. The greater the resistance, the more fuel is consumed. The BOSS™ sensors measure these forces,” explains Mr Van Buren. The measured values are displayed on an LCD bridge display panel and are transferrable to the ship's navigation system. “Less steering corrections reduces the overshoots and shortens the distance travelled. This quickly delivers significant fuel savings.”

Van der Velden has already installed BOSS™ technology on two ultra-large CMA CGM-owned container vessels – the Ural and the Volga. The company recently carried commissioning and sea trials with the first BOSS™ system in cooperation with representatives from Damen’s own R&D team. During the IMO manoeuvring and endurance tests, Van de Velden recorded BOSS™ data and synchronised with the vessel’s dynamics. This successful data collection represents a milestone for Van der Velden product development and creates future opportunities for the next generation of BOSS™. At the same time Van der Velden’s design and engineering knowledge is developed with the ultimate benefit of clients.

The system is not limited to container vessels, however: “This technology is transferrable to the superyacht, cruise ship and dredging sectors.” The company can also pre-install measurement sensors on rudder stocks with an eye to future installation of the total system. “It’s what we call a ‘BOSS-prepared’ delivery,” says Mr Van Buren. “This pre-installation avoids costly dry-docking in the future.”

R&D plays a crucial role across the Damen Shipyards Group

Van der Velden® FLEX tunnel system

Another recent innovation is Van der Velden’s retractable FLEX tunnel system, designed for inland and coastal ships. The system improves manoeuvrability, speed and overall fuel efficiency by approximately 10%. “We developed a retractable tunnel because, for about 85% of the time, loaded inland barges sail in deeper water,” continues Mr Van Buren. “In these situations, tunnels are unnecessary. In fact, they only decrease propulsion capacity and increase fuel consumption.”

With an optimised hull design, the retractable tunnel system, developed in close collaboration with the German Development Centre for Ship Technology and Transport Systems (DST), ensures optimal water flow in both loaded and empty conditions and all water depths of inland rivers and canals.

Success through partnership

R&D plays a crucial role across the Damen Shipyards Group. Based on its extensive knowledge of ship design, back in the 80s, Damen was the first to develop arithmetical schemes and computer models to better understand propulsion characteristics – yielding more accurate predictions of strength, vibration, noise and thrust.

Damen built up its knowledge base through close cooperation with renowned scientific institutions such as Delft University of Technology and the University of Hamburg. Research using scale models in the testing tanks of MARIN (Maritime Research Institute Netherlands) and DST has also played a key role.

In combining the experience of manoeuvring systems experts Van der Velden Marine Systems with propeller nozzle specialists Damen Marine Components, the Damen Shipyards Group is creating a centre of excellence producing products such as include propeller nozzles, rudders and fuel saving systems that can be found across the entire shipping industry, on board vessels ranging from the smallest tugboats to the largest container vessels.


Whether it's a simple question or you need assistance with your Damen product, we believe great things can start with a small conversation.

I'm interested in...